EVK
Talaria TWO + Bosch Sensors
Overview
The InnoPhase IoT Sensor-to-Cloud ADK offers engineers a complete system that has been optimized for low power reading and posting of sensor data. Bosch BMP688 pressure, humidity & temperature and BME581 pressure sensors are pre-integrated onto the boards and additional sensors can be connected via the I2C port. Time-to-Market is accelerated for your development whether it is a water leak sensor, hazardous gas sensor, accelerometer/gyroscope, or any other sensing or monitoring device.
The ADK uses InnoPhase IoT’s Talaria TWO industry-leading low power Wi-Fi solutions with flexible DTIM settings, configurable Keep Alive timings and a digital radio that allows for ultra-low receive and transmit power. Talaria TWO also can be configured as a BLE radio that enables device setup and Wi-Fi provisioning over BLE. With the integrated 80MHz ARM Cortex-M3 processor, 512KB SRAM and 2MB Flash, everything you need is readily available for a sensor to cloud product development.
The ADK includes the following features and components:
- An Android smartphone app (.apk) that enables Wi-Fi Provisioning over BLE.
- Pre-packaged software application for posting data to cloud service providers, such as AWS.
- Flexible APIs that enable developers to modify DTIM, Keep Alive, and data posting intervals in order to optimize battery life for their project requirements.
- This versatile software runs on either of the Sensor-to-Cloud development boards: Talaria TWO Evaluation Board (INP3014-N) and Talaria TWO Low Power Sensor Board (LPS-N)
Block Diagram
Talaria TWOTM Evaluation Board (INP3014-N)
The INP3014-N EVB is an Arduino UNO format interface board with mounted Talaria TWO (T2) Module (INP1014) with a PCB antenna & Bosch BME581 pressure sensor. The production ready SDK includes sensor drivers and sensor-to-cloud reference applications for easy prototyping in stand-alone mode or in conjunction with an external MCU. The tools help to evaluate T2 module performance & capabilities on the board.
Why should you consider Talaria TWO Evaluation Board with Bosch BME581 pressure sensor-based application development kit?
- Amazon AWS IoT & Microsoft Azure Certified with support for Firmware-over-the-Air (FOTA) capabilities
- Matter certified to enable easy setup and interoperability with smart home ecosystems like Apple Home, Amazon Alexa, Google Home & Samsung SmartThings
- ULP IoT applications using T2 & BME581 sensor, and ports to measure current consumption of the system
Getting Started
Please login or register for an account to access documentation in our customer portal.
Talaria TWOTM Low Power Sensor Board (LPS-N)
The LPS-N is a compact form factor board with mounted Talaria TWO (T2) Module (INP1014) & Bosch BMP688 pressure, humidity & temperature sensor – for building battery-powered connected sensors. The production ready SDK includes sensor drivers and sensor-to-cloud reference applications for easy prototyping. The board includes a proximity sensor, OLED display, Grove connector, GPIOs and battery holder.
Why should you consider Talaria TWO Evaluation Board with Bosch BMP688 pressure, humidity & temperature sensor- based application development kit?
- Amazon AWS IoT & Microsoft Azure Certified with support for Firmware-over-the-Air (FOTA) capabilities
- Matter certified to enable easy setup and interoperability with smart home ecosystems like Apple Home, Amazon Alexa, Google Home & Samsung SmartThings
- ULP IoT applications using T2 & BMP688 sensor, and ports to measure current consumption of the system
Getting Started
Please login or register for an account to access documentation in our customer portal.
Configurations
Talaria TWO EVB
- Fully integrated module - Hostless Operation Using Internal Arm Cortex-M3, or Connect to a Host MCU Through UART/SPI Ports
- Eleven (11) Configurable GPIO Ports + Console Port (GPIO17)
- Ultra-Low Power Wi-Fi Connectivity
- Full SDK Environment for Application Development
- Amazon AWS IoT & Microsoft Azure Certified with support for Firmware-over-the-Air (FOTA) capabilities
- Matter certified to enable easy setup and interoperability with smart home ecosystems like Apple Home, Amazon Alexa, Google Home & Samsung SmartThings
Low-Power Sensor Reference Kit
- Captures Sensor Data and Posts to AWS Cloud
- Smartphone App using BLE for Easy Wi-Fi
- Network Provisioning and Device Setup
- Battery-Based – 5+ years operation with optimized data posting
- Small form-factor – 25.40mm x 63.50mm
- Easy to integrate new sensors using I2C
- Hardware connections to external sensors via I2C/SPI ports on the EVK board or over I2C on the Low Power Sensor Board.
- Includes Nuvoton M251 MCU for sensor data processing, plus enables an extended battery life mode
